Trolmaster

The OA6-110 control board is designed to control small 110V pump or solenoid valves (less than 1.5 amps). The OA6-110 has 6 separately controlled 1...

Provides an easy and efficient method to control up to 6 valves… each with individual timer settings. Up to 5 OA6-24 can be connected to a single A...

The Aqua-X system is a professional-grade irrigation control system. It is a fully customizable modular designed system. Installation is simple and...

The AMP-2 module connects the Aqua-x to a set of precision pH / EC & temperature probes to constantly measure the pH / EC & temperature of ...

The WCS-1 water content sensor allows the user to monitor the % of water / nutrients within the growing medium. The moisture level / water content ...

The WD-1 water detector can be used in one of two ways. First, it can be used to simply monitor the floor or a space for water… as a leak-detector....

Additional detector can be added to the WD-1 by using the TSS-1 / T-splitter and water detector (sensor) set. It comes with a T-splitter and an add...

The TSS-2 extension cable is simply a 16 ft extension cable to use with the WD-1 water detectors. It has a male and female end and can extend the d...

The TrolMaster pH probes provide accurate and reliable monitoring on the pH of the water being monitored by the Aqua-x. The PPH-1 probe connects to...

The TrolMaster EC & Temperature probes provide accurate and reliable monitoring on the EC and temperature of the water being monitored by the A...

The TrolMaster EC & Temperature probes provide accurate and reliable monitoring on the EC and temperature of the water being monitored by the A...

The SPH-1 Splitter Hub from TrolMaster makes installation of our controllers as easy as plugging in a phone cable. The SPH-1 hub uses a single RJ12...

If your facility does not have ANY internet service, and you want to connect the Hydro-x, Aqua-x or Hawkeye units, the RTU-1 might be the solution ...

3-in-1 Temp/Humid/Light sensor for the Hydro-X system.

The TS-1 thermostat stations is designed to replace a thermostat connected to a conventional cool only HVAC unit. The TS-1 is wired to the HVAC sys...

The BM-1 weatherproof box is designed for the protection for TrolMaster TS-1/2, HS-1 and ARS-1 controllers from dripping water and low-pressure spr...

The TrolMaster DCC-1 provides a simple solution to control a single device, with more than one condition. For example, people like to turn on their...

TrolMaster revolutionized environmental controller technology when it introduced the Hydro-X. The Hydro-X Pro continues the revolution with a 10’ t...